EU states have agreed that CCS is vital, but progress is slow. Owen Humphreys/PA

The Energy Technologies Institute recently reported that without carbon capture and storage (CCS), the cost of reaching the UK’s climate change targets will double from around £30 billion per year in 2050. So how does it work?

The first step is to capture carbon dioxide (CO₂) emitted from burning fossil fuels at power plants and from energy-intensive industrial processes, such as cement works or steelmaking. This is the most likely technological route to reducing CO₂ emissions, since capturing CO₂ directly from the air, even if feasible, would be very costly.

The CO₂ is separated from the other gases coming out of power station chimneys using specifically designed chemicals such as amines, ammonia and other sorbents (absorbant materials). This first, capture-step is able to remove about 90% of the CO₂ emitted, and represents about 70% of the overall costs (£35-60 per tonne of CO₂). This process is not new - it’s been used for many years in the oil and gas sector, but has yet to be deployed on a large scale.

Once the CO₂ is captured, it must be transported from the source to storage. Shipping and transportation by pipeline are considered as major options in the near term. However, commercial scale deployment in the UK will require extensive pipeline networks. This raises a very important question, can we reuse existing gas pipelines, particularly offshore, for CCS operations? This is unlikely without modifications to the existing infrastructure. Pipeline corrosion from impurities present in the captured CO₂ is a potential risk. So there is more work to be done on CO₂ transport infrastructure and alternative pipeline materials.

Out of the air, into the ground

Finally the CO₂ is permanently stored. Deep geological formations are currently considered the most promising sites for carbon sequestration. By taking advantage of the high pressure and temperatures that naturally occur deep underground, CO₂ can be prevented from escaping to the surface through different trapping mechanisms. The way these interact with each over time increases the stability of the stored CO₂. For example, one million tonnes of CO₂ have been stored annually at the Sleipner project in the North Sea since it started operating in 1996. While for more than 30 years, CO₂ has also been injected in geological formations to aid enhanced oil recovery.

In any case, the important factor of any CCS project is to guarantee that the stored CO₂ stays confined without seepages occurring. A variety of well-proven monitoring systems are available, derived from methods routinely applied in gas and oil exploration. Laboratory experiments and study of natural emissions of CO₂, such as from geothermal areas, are also used to assess any potential environmental impact. However, first and foremost, the accurate selection of the storage site is key to eliminate the probability of leakage. This is then to be matched with reliable monitoring techniques to promptly detect any leaks and allow for any reaction required.

Don’t just store it, use it

Today there is an increasing interest in making some use of the captured CO₂. Better industrial use of CO₂ (currently only around 0.5% of annual emissions) would build new business markets and would reduce the need for long-term storage. Several technical questions are currently being addressed that would allow new chemical, photochemical, electrochemical, reforming, biological and inorganic methods to convert and use captured CO₂ into something useful. A significant amount of research on innovative CO₂ uses comes from the food industry and oil and gas sector. Ultimately, success will depend on whether technologies can reduce CO₂ emissions while creating commercially viable products such as oils, chemicals, fertilisers and fuels.

Recently, Skyonic Corporation in the US (a joint venture between BP and ConocoPhillips) has started operating the world’s first commercial CO₂ capture and utilisation plant in the world. Using low-cost chemical inputs to capture and mineralise CO₂ into valuable carbon-negative products such as hydrochloric acid and sodium bicarbonate, it is expected to remove 300,000 tonnes CO₂ per year from a cement plant, and create 200 jobs.

The International Energy Agency has highlighted CCS as key to mitigating global CO₂ emissions. But deployment remains slow, with only a handful of commercial projects currently in operation.

About The Authors

Mercedes Maroto-Valer, Head of Insitute of Mechanical, Process and Energy Engineering, Heriot-Watt University; Aimaro Sanna, Research Fellow, Heriot-Watt University; Chih-Wei Lin, Research Associate, Heriot-Watt University; Giorgio Caramanna, Research Associate in Geology, Heriot-Watt University; Qi Liu, Postdoctoral Researcher , Heriot-Watt University, and Yolanda Fernandez-Diez, Post-Doctoral Researcher of Chemical Engineering, Heriot-Watt University

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Related Books

Drawdown: The Most Comprehensive Plan Ever Proposed to Reverse Global Warming

by Paul Hawken and Tom Steyer
In the face of widespread fear and apathy, an international coalition of researchers, professionals, and scientists have come together to offer a set of realistic and bold solutions to climate change. One hundred techniques and practices are described here—some are well known; some you may have never heard of. They range from clean energy to educating girls in lower-income countries to land use practices that pull carbon out of the air. The solutions exist, are economically viable, and communities throughout the world are currently enacting them with skill and determination. Available On Amazon

Designing Climate Solutions: A Policy Guide for Low-Carbon Energy

by Hal Harvey, Robbie Orvis, Jeffrey Rissman
With the effects of climate change already upon us, the need to cut global greenhouse gas emissions is nothing less than urgent. It’s a daunting challenge, but the technologies and strategies to meet it exist today. A small set of energy policies, designed and implemented well, can put us on the path to a low carbon future. Energy systems are large and complex, so energy policy must be focused and cost-effective. One-size-fits-all approaches simply won’t get the job done. Policymakers need a clear, comprehensive resource that outlines the energy policies that will have the biggest impact on our climate future, and describes how to design these policies well. Available On Amazon

This Changes Everything: Capitalism vs. The Climate

by Naomi Klein
In This Changes Everything Naomi Klein argues that climate change isn’t just another issue to be neatly filed between taxes and health care. It’s an alarm that calls us to fix an economic system that is already failing us in many ways. Klein meticulously builds the case for how massively reducing our greenhouse emissions is our best chance to simultaneously reduce gaping inequalities, re-imagine our broken democracies, and rebuild our gutted local economies. She exposes the ideological desperation of the climate-change deniers, the messianic delusions of the would-be geoengineers, and the tragic defeatism of too many mainstream green initiatives. And she demonstrates precisely why the market has not—and cannot—fix the climate crisis but will instead make things worse, with ever more extreme and ecologically damaging extraction methods, accompanied by rampant disaster capitalism. Available On Amazon

From The Publisher:
Purchases on Amazon go to defray the cost of bringing you InnerSelf.comelf.com, MightyNatural.com, and ClimateImpactNews.com at no cost and without advertisers that track your browsing habits. Even if you click on a link but don't buy these selected products, anything else you buy in that same visit on Amazon pays us a small commission. There is no additional cost to you, so please contribute to the effort. You can also use this link to use to Amazon at any time so you can help support our efforts.